Costs
How much does a new shopfront cost?
A new shopfront starts from £2,495 plus VAT in aluminium, from £3,995 plus VAT in timber, from £4,995 plus VAT in frameless glass and from £8,495 plus VAT for heritage work. Those are starting points for a plain frontage. Size, glass, doors and the state of the opening decide where yours lands, and the survey turns that into a firm figure.
Are prices higher in London?
Often, because of access more than materials. Restricted loading, parking, permits and out-of-hours working all add labour, and they vary from one street to the next. The survey prices those for your address.
What should a shopfront quote include?
It should itemise every element: drawings, frame, glass, door hardware, sign, shutter, consents, access and removal of the old front. Look for the glass build-up, the frame finish and who pays the council's fee. Our written quotation also sets out the guarantee terms and lists manufacturers' product warranties.
What affects installation cost most?
Access and the condition of the opening usually matter most. Glass too heavy for two people needs lifting gear, and work beside a footway may need a hoarding or scaffold licence. Hidden problems behind an old fascia, such as a failed lintel, can also change the scope.
How much more is laminated glass than toughened?
It costs more, with laminated security glass at £195 to £495 plus VAT per m² of glass. The gap depends on thickness and build-up, and heavier panes may need a deeper frame. Our guide price tool shows it as a percentage on top of the frontage.
Is finance available?
We don't offer finance on this site. Your quotation is itemised and valid for 90 days, so you have time to arrange funding your own way.
Planning and consents
Do I need planning permission to change my shopfront?
Usually yes, if the work materially affects the building's appearance. We found no permitted development route for changing a shopfront in any UK nation, so a new design generally needs an application. A true like-for-like replacement usually doesn't, and the council confirms it for your address.
Do external shutters need permission?
Usually, yes. Installing or replacing a shutter on a shopfront is expressly outside permitted development in England and Wales, so expect an application. In Scotland and Northern Ireland, treat it as a question of whether the appearance materially changes, and ask the council.
Do I need advertisement consent for a shop sign?
Often not for a modest sign, because each nation's regulations allow signs within set limits. England and Wales cap the top of a sign at 4.6m or the first-floor sill if lower, Scotland at 4.6m or first-floor level, and Northern Ireland at 5m or the sill. Lit signs have further limits, and that route is unavailable in conservation areas in all four nations. Outside the limits you need express consent from the council.
What extra consent does a listed building need?
Listed building consent, on top of any planning permission or advertisement consent. Who decides depends on the nation: local planning authorities in England, planning authorities with Welsh Ministers in Wales, planning authorities in Scotland and councils in Northern Ireland. Unauthorised works are a criminal offence. Like-for-like repair may not need consent, so ask the council first.
Who applies for planning, the tenant or the owner?
Either can usually apply, and on a let unit it is often the tenant or their agent. Ask the council what notice the owner must be given. Landlord's consent under the lease is a separate matter, so check that too.
Do the rules differ between councils?
Yes, and between nations too. England, Wales, Scotland and Northern Ireland each have their own planning and advertisement rules, and each council reads them through its own policies and design guidance. Ask the council early, as its view on your street will shape the design.
Timescales
How long does fitting a shopfront take?
Typically 1 to 5 days on site. A straightforward replacement sits at the short end, while structural changes, signs, shutters and heritage joinery push it longer. We confirm the expected days once drawings are signed off.
How long does a shopfront take from enquiry to completion?
Typically two to three months where consent is needed, and less where it isn't. That allows for survey and drawings, typically 4 to 8 weeks for consent, typically 2 to 4 weeks for fabrication and 1 to 5 days on site. A landlord's approval or listed building consent can extend it.
What causes the biggest delays?
Consents and late decisions cause most of them. Glass and frames can't go into production until dimensions are signed off, so a changed door position or an unanswered landlord query moves everything behind it. Starting the landlord conversation at survey stage helps more than anything else.
Do I have to close during installation?
Not always. Closed-day or out-of-hours installation can be arranged, and some stages can run behind a temporary screen while you trade. The noisiest and most exposed day, when the old front comes out, is the one to plan around.
How long does a frameless glass shopfront take?
Typically about the same as a framed one, at 2 to 4 weeks' fabrication and 1 to 5 days on site. The difference is sequence, because toughened glass can't be cut after toughening. Any opening work has to be finished and re-measured before the glass is ordered.
How long does planning add to a shopfront job?
Typically 4 to 8 weeks for consent. Allow more where a building is listed or where signs and planning go in as separate applications. Fabrication usually starts once consent is in hand.
Materials and design
Should I choose aluminium, timber or uPVC?
Aluminium suits most modern frontages, because it gives slim sightlines and long spans with little upkeep. Timber belongs on traditional and heritage fronts, where mouldings carry the design. uPVC isn't one of our shopfront materials, since its wider sections work against a fine glass line.
Can you match my existing colour or profile?
Colour usually, profile sometimes. Powder coating can be matched to a RAL reference or a sample, while an older aluminium profile may no longer exist and has to be matched by eye. Timber mouldings can be cut to follow an original section.
Are shopfronts energy efficient?
They lose more heat than a wall, but double-glazed units and thermally broken frames narrow the gap. England's Approved Document L sets no maximum U-value for display windows, and gives pedestrian doors 1.6 W/m²K and high-usage entrance doors 3.0. The 2026 edition, which takes effect in England on 24 March 2027, keeps those figures.
How does frameless glass compare with aluminium?
Frameless glass gives the clearest view, while aluminium gives more security, insulation and design detail. Without a frame, panes rely on channels, patch fittings and sealant joints, so the structure above matters more. It also costs more, and a broken pane is a bigger job to replace.
How does a shopfront differ from curtain walling?
A shopfront fills an opening at ground level, while curtain walling is a glazed facade fixed to the building's frame, usually across several floors. Curtain walling has its own product standard, BS EN 13830. Shopfront sections are lighter, and they carry doors, signs and shutters more easily.
How deep should a fascia be?
About a fifth of the shopfront's height is a good starting point, and it should rarely run deeper. A fascia that hides the first-floor sill or swallows the cornice is the commonest mistake on older parades. Fix the depth from the building's lines, then fit the lettering to it.
Security
Is laminated glass burglar proof?
No glass is burglar proof. Laminated glass buys time, because the interlayer holds the pane together and forces an attacker to work through it. BS EN 356 tests that resistance by class, and the frame and fixings matter as much as the glass.
Is laminated glass better than toughened?
For security, yes, but toughened glass takes a harder knock. Toughened glass breaks into small pieces and leaves an open hole, while laminated glass cracks and stays in the frame. Many security panes combine the two.
Is laminated glass legally required?
Not as a general rule. Building guidance in all four UK nations asks glass in critical locations to break safely, and toughened or laminated glass can both be used for that. Security laminate is a choice based on risk, so ask your insurer whether it has a view.
What is PAS 24, and do I need it?
PAS 24:2022 sets enhanced security requirements for doorsets and windows, written for dwellings and other buildings exposed to comparable risk. A shop door doesn't usually need it to meet building rules. An insurer or landlord may ask for it, in which case the door has to be tested to it, and the certificate comes with the product.
What happens after a break-in?
Make the premises safe, then report it to the police and your insurer before clearing up. For the repair, book a paid call-out on our call-outs page, at £165 plus VAT for attendance and the first hour. Those are booked visits and not a rapid-response service, so use your insurer's helpline if the shop can't be secured. If the frontage needs replacing, the survey is free.
What does an LPS 1175 grade like B3 mean?
It is a tested level of intruder resistance under the LPCB standard, combining a tool category with a delay in minutes. B3 pairs tool category B with three minutes. Whether you need that level depends on your risk and your insurer, and the certificate comes with the product where one applies.
Access and safety
Does the Equality Act require automatic doors?
No, the Equality Act 2010 doesn't name automatic doors. In Great Britain it requires reasonable steps to remove, alter or avoid a physical feature, and that duty anticipates disabled people generally. An automatic door is one way to meet it, alongside a lighter closer or a level threshold. Northern Ireland has its duties under the Disability Discrimination Act 1995.
Are listed entrances exempt from access requirements?
Not automatically. Listing means physical changes need care and often listed building consent, but the duty to take reasonable steps doesn't disappear. Where a historic door can't sensibly be altered, avoiding the feature with another accessible route may be the reasonable step. Ask the council early, because access and heritage are weighed together.
Is my doorway wide enough for wheelchairs and scooters?
Measure the clear opening: 1000mm is the figure for new public entrances in England, Wales and Northern Ireland, 775mm for existing ones, and 800mm in Scotland. Clear width is the gap with the door open, which is always less than the leaf. Larger scooters may need more, and all four nations use a 1500 x 1500mm entrance landing.
What height do markings on glass doors go?
One band sits between 850 and 1000mm above the floor and a second between 1400 and 1600mm, the same across the UK. They need to stand out against what's seen through the glass in both daylight and artificial light. A logo or etched pattern can do the job when it's drawn in from the start.
What glass is needed low down and around doors?
Safety glass, in what building guidance calls critical locations, broadly below 800mm and in or beside doors up to 1500mm. England and Northern Ireland use BS EN 12600 Class 3, or Class 2 for door panes over 900mm wide. Wales refers to BS 6206 and Scotland to BS 6262-4.
Which way must a fire exit door open?
Dedicated fire exits generally open in the direction of escape, in all four UK nations, and can't be locked against immediate use. They also can't be sliding or revolving doors. Scotland lets doors open against escape where occupancy is 60 or fewer. In England and Wales that is a matter for the responsible person, while Scotland and Northern Ireland speak of dutyholders.
Can a shop door open outwards over the pavement?
Generally not in England and Wales, where section 153 of the Highways Act 1980 bars it, apart from public buildings by consent. Northern Ireland requires Department consent, and in Scotland you should ask the council. An outward escape door can conflict with these rules, and setting the door back within the building line usually solves it.
Working with us
Who is my contract with?
Your contract is with S&K Glazing Limited, company number 14088194. Shopfront Specialists is its trading name, and it is part of the S&K Group.
What does your guarantee cover?
Workmanship, for 10 years, on the written terms set out in your quotation.
Who carries out the work?
Vetted teams working under S&K Glazing, with one named contact for the job. That contact stays with you from survey to handover, so you aren't passing messages between trades.
What insurance do you hold?
We hold £5m public liability insurance through S&K Glazing Limited, the company you contract with. If a landlord or managing agent needs to see the certificate before work starts, tell us when you accept the quotation.
Do you carry out repairs?
Yes, as paid call-outs on our call-outs page, separate from the free survey for new work. A repair call-out is £165 plus VAT for attendance and the first hour, and a shutter service is £145 plus VAT per shutter. If a repair turns into a replacement, we'll survey it as new work.
Do you work with architects and shopfitters?
Yes, we can work to your design or specification. We survey the opening and produce scale drawings for sign-off before anything is made. You keep one contract and one named contact for the frontage package.
Can you roll out one design across several sites?
Yes, multi-site work is priced per estate after surveying sample sites. The design is adapted to each opening, so the brand stays consistent even where the buildings differ.
Tell us about your frontage
Send the address and a photo. We'll come and measure it, at no cost.