0800 088 6248 Get a guide price
  1. Home
  2. Local planning guides
  3. Brent

Brent shopfront guidance

A plain-English summary of Shopfronts SPD3.

The guidance from Brent Council is Shopfronts SPD3 (2018). It tells applicants what the council expects from new and altered shopfronts.

Summary written by us after reading the council's document. Checked November 2026. Not legal advice.

What does the Brent guidance ask for?

These are the requirements we picked out when we read the document, in our own words.

  • A stallriser of at least 300mm should be kept or installed at the base of the shop display.
  • Fascia text should cover no more than half the fascia's width and height, with lettering no taller than 30cm.
  • Solid or pin-hole roller shutters are discouraged, and security options run from laminated glass to internal open shutters, then external open shutters only where needed for insurance.
  • Internally lit signs will not normally be permitted, and illuminated projecting signs are ruled out.
  • Forecourts must keep a clear pedestrian route of 3m on busy primary routes and 2m elsewhere.

What does that mean for your frontage?

Look at the diagrams and photographs as closely as the words. They show what the planning officers hope to see, so borrow the logic of the proportions and leave the particular style to your brand.

You can read the original here: Shopfronts SPD3.

Which consents are likely in Brent?

England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for shopfront work at premises in the Brent area: a planning application, or work that doesn't materially affect the external appearance.

Lighting moves a sign out of Class 5 in England, because that class allows illumination only for medical-type notices. Class 4B then applies at premises in the Brent area: halo or character-only lighting, static, with the lowest part at least 2.5m up. Brightness is capped at 600 cd/m² on signs up to 10m² and 300 cd/m² above that, and anything outside these limits needs advertisement consent.

Open Shopfronts SPD3 on the council website

Common questions

Does a new shopfront in the Brent area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

What rules apply to a fire exit door through a shopfront in the Brent area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Does a shop sign in the Brent area need advertisement consent?

Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.

How we can help

Tell us about your frontage

Send the address and a photo. We'll come and measure it, at no cost.

Call usGet a guide price