The guidance from Cambridge City Council and South Cambridgeshire District Council (Greater Cambridge Shared Planning) is Appendix I: Shopfront guidance (Draft Greater Cambridge Local Plan), which carries no publication date. It tells applicants what the council expects from new and altered shopfronts. It is a draft, so check its status with the council before you rely on it.
What does the Greater Cambridge guidance ask for?
These are the requirements we picked out when we read the document, in our own words.
- Original stallriser features should be kept and repaired unless beyond reasonable repair.
- Solid external roller shutters would only be approved if no other protection is adequate, and roller grilles need a case supported by police and insurer letters.
- Illuminated box fascias are not acceptable, and spotlights should be limited to two on most shopfronts or three on very wide ones.
- Plastics, aluminium cladding and reflective metals are unacceptable on historic shopfronts.
- As a general rule window signs should cover no more than 25% of the glazing, and hanging signs need 2.4m clearance and 1m from the kerb.
What does that mean for your frontage?
Look at the diagrams and photographs as closely as the words. They show what the planning officers hope to see, so borrow the logic of the proportions and leave the particular style to your brand.
You can read the original here: Appendix I: Shopfront guidance (Draft Greater Cambridge Local Plan).
Which consents are likely in Greater Cambridge?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for shopfront work at premises in the Greater Cambridge area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Class 4B, England's class for lit signs, isn't available in conservation areas, Areas of Outstanding Natural Beauty, National Parks or the Broads, so a lit sign there normally needs advertisement consent. In an area of special control it is unavailable too, and Class 5 drops to a 3.6m top height, 0.3m letters and one-tenth of the building face up to 3.6m. Ask the council which designations cover premises in the Greater Cambridge area.
Open Appendix I: Shopfront guidance (Draft Greater Cambridge Local Plan) on the council website
Common questions
Do I need listed building consent for a shopfront in the Greater Cambridge area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
What rules apply to a fire exit door through a shopfront in the Greater Cambridge area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Greater Cambridge area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.