0800 088 6248 Get a guide price
  1. Home
  2. Local planning guides
  3. Conwy

Conwy shopfront guidance

A plain-English summary of LDP36: Shop front design.

The guidance from Conwy County Borough Council is LDP36: Shop front design (2017). It tells applicants what the council expects from new and altered shopfronts.

Summary written by us after reading the council's document. Checked November 2026. Not legal advice.

What does the Conwy guidance ask for?

These are the requirements we picked out when we read the document, in our own words.

  • Stallriser height should not normally exceed 20% of the overall shopfront height.
  • Fascia depth is restricted to the depth of the console, or one-fifth of the distance from cornice to pavement where there are no consoles.
  • Illuminated box signs and vinyl or acrylic signs are not permitted in conservation areas or on historic buildings, with halo-lit or individually lit letters preferred.
  • Large glazed areas need visual markings at least 150mm high at 850 to 1000mm and 1400 to 1600mm above the ground.
  • Dutch, balloon or plastic canopies are not permitted in conservation areas or on historic buildings.

What does that mean for your frontage?

Look at the diagrams and photographs as closely as the words. They show what the planning officers hope to see, so borrow the logic of the proportions and leave the particular style to your brand.

You can read the original here: LDP36: Shop front design.

Which consents are likely in Conwy?

Like-for-like replacement usually needs no planning permission in Wales, because the external appearance isn't materially affected. Matching the existing materials, proportions and glass line is what keeps a job in that position. For shopfront work at premises in the Conwy area, changing any of those usually means an application, which the council can confirm.

Class 4B isn't available in Welsh conservation areas, so a lit sign there normally needs advertisement consent. In an area of special control, Class 5 tightens to a 3.6m top height and a one-tenth area limit. Ask the council whether either applies to premises in the Conwy area.

Open LDP36: Shop front design on the council website

Common questions

Does a replacement shopfront in the Conwy area need Building Regulations approval?

Assume yes until building control says otherwise, because Wales has no like-for-like exemption. Glazing is judged against Approved Document N, as Wales keeps Part N. A registered installer can self-certify replacement windows and doors in non-dwellings, but not structural glass, curtain walling or revolving doors.

Is planning permission needed for a new shopfront in the Conwy area?

Usually yes, if the work materially affects the external appearance, because Wales has no permitted development route for changing a shopfront. Most of the Planning (Wales) Act 2026 hasn't been commenced yet, so the existing rules apply. A true like-for-like replacement usually avoids an application, and the council confirms the position.

When does a shop sign in the Conwy area need advertisement consent?

A sign needs advertisement consent when it falls outside Class 5 or Class 4B of the 1992 Advertisement Regulations, which still apply in Wales. Within Class 5, an unlit sign sits on a wall containing a shop window and tops out at 4.6m or the first-floor sill if lower. A lit sign in a conservation area needs consent, because Class 4B isn't available there.

How we can help

Tell us about your frontage

Send the address and a photo. We'll come and measure it, at no cost.

Call usGet a guide price