The guidance from Royal Borough of Kensington and Chelsea is Shopfront Design Guidelines Supplementary Planning Document (2011). It tells applicants what the council expects from new and altered shopfronts.
What does the Kensington and Chelsea guidance ask for?
These are the requirements we picked out when we read the document, in our own words.
- Stallriser height should not exceed the base of the pilasters, around 450mm, or the fascia depth, whichever is less.
- Box fascias are not to be used, and painted timber is treated as the most appropriate fascia on nineteenth-century buildings.
- External shutters are not acceptable across most of the borough, with internal open-link grilles preferred.
- Each shopfront may have only one projecting sign, generally up to 600 x 400mm with at least 2.4m ground clearance.
- New shopfronts need level or ramped access with a 1m wide door and a flush threshold, or no higher than 15mm if a step is unavoidable.
What does that mean for your frontage?
Separate the advice on new fronts from the advice on existing features. If your building has original details, list them before anything is stripped out, because the guide's sections on retention may matter more to you than its design rules.
You can read the original here: Shopfront Design Guidelines Supplementary Planning Document.
Which consents are likely in Kensington and Chelsea?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for shopfront work at premises in the Kensington and Chelsea area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Class 4B, England's class for lit signs, isn't available in conservation areas, Areas of Outstanding Natural Beauty, National Parks or the Broads, so a lit sign there normally needs advertisement consent. In an area of special control it is unavailable too, and Class 5 drops to a 3.6m top height, 0.3m letters and one-tenth of the building face up to 3.6m. Ask the council which designations cover premises in the Kensington and Chelsea area.
Open Shopfront Design Guidelines Supplementary Planning Document on the council website
Common questions
Does a new shopfront in the Kensington and Chelsea area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Does the Equality Act apply to a shop entrance in the Kensington and Chelsea area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Do roller shutters need planning permission in the Kensington and Chelsea area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.