The guidance from Newry, Mourne and Down District Council is Advice Guide 8 - General Principles of Good Shop Front Design, which carries no publication date. It tells applicants what the council expects from new and altered shopfronts.
What does the Newry, Mourne and Down guidance ask for?
These are the requirements we picked out when we read the document, in our own words.
- Stall risers should be at least 500mm high, or reach the top of the pilaster base, with a moulded projecting sill below the glazing.
- Ground-floor fascias should be about 600mm high, and acrylic or fluorescent materials are not acceptable.
- Surface-mounted shutters will not receive planning permission, and unpainted galvanised shutters will not be permitted.
- Plastic and projecting box signs are not permitted in conservation areas, and elsewhere fascia box signs should protrude no more than 100mm.
- Blinds and canopies should clear the pavement by 2.3m.
What does that mean for your frontage?
Read the guide before you commission drawings. It is far easier to set the stallriser height, fascia depth and shutter type with the council's preferences in mind than to redraw a finished scheme.
You can read the original here: Advice Guide 8 - General Principles of Good Shop Front Design.
Which consents are likely in Newry, Mourne and Down?
A true like-for-like replacement usually needs no planning permission in Northern Ireland, since the external appearance isn't materially affected. Altered materials, proportions or sightlines usually do count, so for shopfront work at premises in the Newry, Mourne and Down area, planning permission is then likely to be needed. The council confirms where a job sits.
A lit projecting sign in Northern Ireland can generally reach 1m² per surface and 1m high under Class 4(2). Projection is limited to 1m or two-thirds of the footway, so work to the smaller figure. At premises in the Newry, Mourne and Down area, anything bigger needs advertisement consent, and so does a lit sign in a conservation area.
Open Advice Guide 8 - General Principles of Good Shop Front Design on the council website
Common questions
Does the Disability Discrimination Act apply to a shop entrance in the Newry, Mourne and Down area?
Yes. The Disability Discrimination Act 1995 applies in Northern Ireland, and section 21 deals with physical features that make a service hard for disabled people to use. Regulations made in 2007 (SR 2007/473) add detail on features, third-party consent and design standards.
Do I need planning permission to change a shopfront in the Newry, Mourne and Down area?
Usually yes, when the work materially affects the external appearance. Northern Ireland's 2015 Order appears to offer no permitted development route for a shopfront. The council confirms the position, and a true like-for-like replacement usually needs no application.
What building approval does a shopfront in the Newry, Mourne and Down area need?
Usually a full plans application to Building Control in Northern Ireland, because building notices are for single dwellings. The Technical Booklets set the detail, with Booklet V for glass and Booklet R for access. Only dwelling windows and doors are exempt, so ask Building Control before assuming a like-for-like job falls outside the rules.