The guidance from London Borough of Richmond upon Thames is Shopfronts: Supplementary Planning Document (2010). It tells applicants what the council expects from new and altered shopfronts.
What does the Richmond upon Thames guidance ask for?
These are the requirements we picked out when we read the document, in our own words.
- The fascia should be no deeper than the cornice and architrave combined, and no more than one-fifth of total shopfront height.
- External roller shutters are unlikely to be permitted, and internal grilles are the only acceptable security form in conservation areas and on listed buildings.
- Internally lit box fascia signs will usually be resisted, with externally lit fascias generally preferred.
- Upper-floor business signs should be applied to the window and be no more than 10cm high.
- Doors should be at least 850mm wide, and ramps no steeper than 1:12 on runs under 5m.
What does that mean for your frontage?
Read the guide before you commission drawings. It is far easier to set the stallriser height, fascia depth and shutter type with the council's preferences in mind than to redraw a finished scheme.
You can read the original here: Shopfronts: Supplementary Planning Document.
Which consents are likely in Richmond upon Thames?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for shopfront work at premises in the Richmond upon Thames area, an application is then likely. The council confirms which side of that line a job falls on.
A lit projecting sign at premises in the Richmond upon Thames area has firm limits under Class 4B in England: 0.75m² per surface and 1m high. It can project 1m, or two-thirds of the footway if that is less, and it can't sit over the carriageway. A larger sign needs advertisement consent, and so does a lit one in a conservation area.
Open Shopfronts: Supplementary Planning Document on the council website
Common questions
Do I need planning permission to change a shopfront in the Richmond upon Thames area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Does a shop sign in the Richmond upon Thames area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.
Do I need listed building consent for a shopfront in the Richmond upon Thames area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.