0800 088 6248 Get a guide price
  1. Home
  2. Local planning guides
  3. Shropshire

Shropshire shopfront guidance

A plain-English summary of Oswestry Shopfront Design Guide: Standing Pre-Application Advice Note.

The guidance from Shropshire Council is Oswestry Shopfront Design Guide: Standing Pre-Application Advice Note (2025). It covers Oswestry only, so it doesn't apply across the whole council area.

Summary written by us after reading the council's document. Checked November 2026. Not legal advice.

What does the Shropshire guidance ask for?

These are the requirements we picked out when we read the document, in our own words.

  • In Oswestry, the optimum stallriser height is 300mm to 700mm, in hardwearing materials such as brick, glazed tile or stone.
  • Fascia boards should not exceed 380mm unless there is historic precedent, and new boards should not go over existing ones.
  • Removable mesh grilles and external or solid roller shutters are not appropriate in the conservation area and strongly discouraged elsewhere.
  • Internally lit signs are generally resisted, and flashing lights and neon are unlikely to be permitted.
  • uPVC and aluminium should be avoided for doors and window frames, along with floor-to-ceiling glass doors.

What does that mean for your frontage?

Look at the diagrams and photographs as closely as the words. They show what the planning officers hope to see, so borrow the logic of the proportions and leave the particular style to your brand.

You can read the original here: Oswestry Shopfront Design Guide: Standing Pre-Application Advice Note.

Which consents are likely in Shropshire?

England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for shopfront work at premises in the Shropshire area: a planning application, or work that doesn't materially affect the external appearance.

Lighting moves a sign out of Class 5 in England, because that class allows illumination only for medical-type notices. Class 4B then applies at premises in the Shropshire area: halo or character-only lighting, static, with the lowest part at least 2.5m up. Brightness is capped at 600 cd/m² on signs up to 10m² and 300 cd/m² above that, and anything outside these limits needs advertisement consent.

Open Oswestry Shopfront Design Guide: Standing Pre-Application Advice Note on the council website

Common questions

What rules apply to a fire exit door through a shopfront in the Shropshire area?

It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.

Do I need listed building consent for a shopfront in the Shropshire area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Does the Equality Act apply to a shop entrance in the Shropshire area?

Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.

How we can help

Tell us about your frontage

Send the address and a photo. We'll come and measure it, at no cost.

Call usGet a guide price