For aluminium shopfronts across Buckinghamshire, we draw first and order later. You see a scale drawing with signed-off dimensions before anything is made, so the frontage on paper is the frontage you get.
Finishes behave differently at full size. Any sample we show you for aluminium shopfronts is better judged at the premises in daylight, since a colour that looks quiet on a desk can read much louder across a whole elevation.

How do we handle aluminium shopfronts for premises in Buckinghamshire?
Few shop openings in Buckinghamshire or anywhere else are truly square, and aluminium shows it, because straight lines make any lean in a building obvious. We measure at several heights and widths, then decide where the difference gets hidden, which is usually behind the fascia and the pier covers.
Across Buckinghamshire, the same aluminium section can look sharp or wrong depending on what stands around it. We choose colour on site against the real brick, stone or render at your address, because a RAL chip under office lights tells you very little.
What consents apply to aluminium shopfronts in Buckinghamshire?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for aluminium shopfronts at premises in the Buckinghamshire area: a planning application, or work that doesn't materially affect the external appearance.
How much do aluminium shopfronts cost in Buckinghamshire?
The guide for aluminium shopfronts is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
| Area | Buckinghamshire |
|---|---|
| Nation | England |
| Towns covered | 13 |
| Main town | Milton Keynes |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about aluminium shopfronts in Buckinghamshire
Does the distance to Buckinghamshire change the quote?
Any travel or access cost sits on its own line in the itemised quotation, so you can see it. Scaffolding, restricted delivery times and lifting gear tend to matter more than mileage.
Can you work with our shopfitter in Buckinghamshire?
Yes. We can supply the front as one package within a wider fit-out, working to the shopfitter's programme and agreeing the floor, ceiling and signage interfaces on the drawings.
Do you fit aluminium shopfronts across Buckinghamshire?
Yes. We travel from Great Barr to survey and fit across Buckinghamshire, using vetted teams working under S&K Glazing with one named contact for the job.
What rules apply to a fire exit door through a shopfront in the Buckinghamshire area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do roller shutters need planning permission in the Buckinghamshire area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.