We measure, draw and fit aluminium fronts for Cannock premises under one contract. You deal with one named contact from the first survey to handover.
A survey in Cannock usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How would we approach aluminium shopfronts for your Cannock premises?
Where Cannock premises have a deep recessed entrance, it's usually worth keeping. The angled returns add display length and shelter, and a slim frame with soffit lighting turns a dark corner into the brightest part of the front in the evening.
If your Cannock branch is one stop in a wider rollout, we'd adapt your standard details to this opening instead of forcing the opening to fit them. Section, colour and fixings stay the same as the rest of the estate, while mullion spacing and fascia depth answer to the building.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Cannock parade, keep the line and win attention with lettering, lighting and what's in the window.
What consents could affect aluminium shopfronts in Cannock?
For aluminium shopfronts at premises in the Cannock area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Planning and advert applications for Cannock premises normally go to Cannock Chase District Council. We check the position for your address at survey.
What should you budget for aluminium shopfronts in Cannock?
A sensible starting budget is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Cannock |
|---|---|
| Area | Staffordshire |
| Postcode districts | WS11, WS12 |
| Planning authority | Cannock Chase District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 11 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Cannock
What do you need before surveying a unit in Cannock?
An address, a few photos and a rough idea of what you have in mind are enough to book the survey. If you have a lease, a landlord's specification or brand guidelines, send those too, because they shape the drawing.
What happens to my old shopfront in Cannock?
We strip it out and take it away, and that work appears as its own line on the quotation. If part of the old front is worth keeping, such as a stallriser or decorative ironwork, say so at survey and we'll draw around it.
Will an aluminium front make my Cannock shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
Do roller shutters need planning permission in the Cannock area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
What rules apply to a fire exit door through a shopfront in the Cannock area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.