Few businesses can shut for a week, so any time on site for aluminium shopfronts in County Durham is planned around the hours you trade. Closed-day or out-of-hours installation can be arranged.
Access gets as much attention as appearance at survey. Where a vehicle can stop, how long sections reach the opening and how the pavement stays safe for the public all shape the programme for aluminium shopfronts in County Durham.

What should you look for from aluminium shopfronts in County Durham?
Large panes set the logistics for any aluminium front in County Durham. We look at where a glass vehicle can stop, how far the panes must be carried and whether a lifting aid will fit, because a 3m sheet that can't reach the opening on the day is a wasted trip.
Few shop openings in County Durham or anywhere else are truly square, and aluminium shows it, because straight lines make any lean in a building obvious. We measure at several heights and widths, then decide where the difference gets hidden, which is usually behind the fascia and the pier covers.
What consents apply to aluminium shopfronts in County Durham?
For aluminium shopfronts at premises in the County Durham area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
How much do aluminium shopfronts cost in County Durham?
We would budget £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Area | County Durham |
|---|---|
| Nation | England |
| Towns covered | 18 |
| Main town | Durham |
| Planning regime | England: TCPA 1990 and the 2007 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents) |
| Survey | Free for new work, from our Great Barr base |
Questions about aluminium shopfronts in County Durham
Does the distance to County Durham change the quote?
Any travel or access cost sits on its own line in the itemised quotation, so you can see it. Scaffolding, restricted delivery times and lifting gear tend to matter more than mileage.
Do you fit aluminium shopfronts across County Durham?
Yes. We travel from Great Barr to survey and fit across County Durham, using vetted teams working under S&K Glazing with one named contact for the job.
How long would an aluminium shopfront take in County Durham?
Typically 2 to 4 weeks to fabricate once drawings are signed off, then 1 to 5 days on site. The programme depends on the opening rather than the postcode, so it is set after the measured survey.
Does a new shopfront in the County Durham area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
What rules apply to a fire exit door through a shopfront in the County Durham area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.