0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Aluminium shopfronts
  4. Exeter

Aluminium shopfronts in Exeter

One itemised price and one named contact for Exeter premises.

A good aluminium shopfront in Exeter should look as if it grew out of the building above it. We set the stallriser, mullions and fascia from the proportions of your elevation, across Exeter and the rest of Devon.

Measuring the opening is the easy part of a survey in Exeter. We also look at the beam above, the pavement fall and any meters or drains nearby.

Dark bronze aluminium shopfront with slim frames, a low stallriser and a glazed entrance door

What should you think about before commissioning aluminium shopfronts in Exeter?

A narrow Exeter unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.

Some Exeter landlords issue a shopfront specification, and we'd draw to it from the start. Where your brand needs something different, we mark each departure on the drawing so the landlord can approve the front without a round of guesswork.

If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Exeter premises on a slope look settled once that line is true.

Who approves aluminium shopfronts in Exeter?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for aluminium shopfronts at premises in the Exeter area, an application is then likely. The council confirms which side of that line a job falls on.

We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Exeter premises normally go to Exeter City Council.

What is a realistic budget for aluminium shopfronts in Exeter?

The guide for aluminium shopfronts is £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.

Exeter at a glance
TownExeter
AreaDevon
Postcode districtsEX1, EX2, EX3, EX4
Planning authorityExeter City Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 144 miles
SurveyFree for new work

Questions about aluminium shopfronts in Exeter

Can you match a shopfront I like elsewhere in Devon?

Usually, yes. Send the photo and address, and we'll work out the section, colour and proportions behind it, then adapt them to your Exeter opening.

Who carries out the work in Exeter?

Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Exeter from Great Barr.

Will an aluminium front make my Exeter shop warmer?

It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.

Do I need listed building consent for a shopfront in the Exeter area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Do I need planning permission to change a shopfront in the Exeter area?

Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.

Planning aluminium shopfronts in Exeter?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price