Want a new front for your Newport premises? An aluminium frame gives you slim sightlines and a hard-wearing finish in any RAL colour, proportioned to the building rather than picked from a range.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What makes aluminium shopfronts work well on Newport premises?
A narrow Newport unit gains from fewer parts. Under about 4m wide, we'd offset the door and use one large pane rather than a central door with two slivers of glass either side, which makes the front feel wider than it measures.
If your Newport frontage faces south or west, the colour choice has a physical effect. Dark frames run hot in full sun and long runs of aluminium move, so we'd leave room for expansion at the fascia and look at solar control glass to protect stock.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Newport premises on a slope look settled once that line is true.
How much should you set aside for aluminium shopfronts in Newport?
We would budget £2,495 to £11,995 plus VAT for a typical 3 to 7 m frontage. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Could aluminium shopfronts in Newport need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for aluminium shopfronts at premises in the Newport area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Newport premises normally go to Telford & Wrekin Council. We check the position for your address at survey.
| Town | Newport |
|---|---|
| Area | Shropshire |
| Postcode districts | TF10 |
| Planning authority | Telford & Wrekin Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 25 miles |
| Survey | Free for new work |
Questions about aluminium shopfronts in Newport
Who carries out the work in Newport?
Vetted teams working under S&K Glazing carry it out, with one named contact from survey to handover. The contract is with S&K Glazing Limited, and we travel to Newport from Great Barr.
Will an aluminium front make my Newport shop warmer?
It can, though the glass matters more than the frame. A thermally broken section with double-glazed units loses less heat than single glazing, and a well-sealed door is often the change you notice most on a cold day.
What do you need before surveying a unit in Newport?
An address, a few photos and a rough idea of what you have in mind are enough to book the survey. If you have a lease, a landlord's specification or brand guidelines, send those too, because they shape the drawing.
Do I need listed building consent for a shopfront in the Newport area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Do I need planning permission to change a shopfront in the Newport area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.