A slim framed slider can sit inside an existing Friern Barnet frontage with little change to the outside. The drive hides behind the fascia, and the leaves line up with the screens either side.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How do you design around the building when planning automatic sliding doors in Friern Barnet?
A deep recess is a gift for an automatic door. At Friern Barnet premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.
A corner unit in Friern Barnet can often move its entrance to the angle, where two directions of footfall meet. We'd look at a curved or canted door set, and check the wind on both streets before fixing the position.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Friern Barnet premises, since a shutter box or old beam may set the limit.
What might automatic sliding doors cost in Friern Barnet?
We would budget £3,895 to £11,995 plus VAT per entrance. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What permissions should you check for automatic sliding doors in Friern Barnet?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for automatic sliding doors at premises in the Friern Barnet area: a planning application, or work that doesn't materially affect the external appearance.
Expect planning and advert applications here to go to London Borough of Barnet in the normal way. We check what that means for your building when we survey it in Friern Barnet.
| Town | Friern Barnet |
|---|---|
| Area | Greater London |
| Postcode districts | N10, N11, N12, N20 |
| Planning authority | London Borough of Barnet |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 99 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Friern Barnet
How noisy would an automatic door be at my Friern Barnet shop?
A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.
Will an automatic door fit my Friern Barnet shop?
It depends on the width of the front and the depth at the head. A survey shows whether the parked leaves fit and where the operator can hide, and if a slider won't work we'd look at a powered swing door.
Can an automatic door work with my Friern Barnet shop's alarm and locks?
Yes. The door can lock at closing, and it can link to your alarm or access control where the systems allow, with a manual key position as a fallback.
Do I need planning permission to change a shopfront in the Friern Barnet area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Does a new shopfront in the Friern Barnet area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.