Swinging doors can be a daily nuisance for staff carrying stock through a shop in Glenfield. A sliding set clears the opening with no effort, and keeps the floor space around the door usable.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Glenfield, because what sits behind them can change the drawing.

What should you think about before commissioning automatic sliding doors in Glenfield?
In a parade in Glenfield with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
A deep recess is a gift for an automatic door. At Glenfield premises with one, we'd set the door back from the street so the sensors see less of the pavement and the leaves get some shelter from the wind.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Glenfield premises.
Who approves automatic sliding doors in Glenfield?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for automatic sliding doors at premises in the Glenfield area, an application is then likely. The council confirms which side of that line a job falls on.
Planning and advert applications for Glenfield premises normally go to Blaby District Council. We check the position for your address at survey.
What is a realistic budget for automatic sliding doors in Glenfield?
As a working budget, use £3,895 to £11,995 plus VAT per entrance. Your place inside that range for automatic sliding doors depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | Glenfield |
|---|---|
| Area | Leicestershire |
| Postcode districts | LE1, LE3, LE4, LE6 |
| Planning authority | Blaby District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 31 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Glenfield
What do I need to arrange for a door in Glenfield?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
How noisy would an automatic door be at my Glenfield shop?
A healthy door is very quiet, and you'd normally hear only a soft hum. Noise usually means worn rollers or grit in the guide, which a service will put right.
Can an automatic door work with my Glenfield shop's alarm and locks?
Yes. The door can lock at closing, and it can link to your alarm or access control where the systems allow, with a manual key position as a fallback.
Do I need listed building consent for a shopfront in the Glenfield area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
What rules apply to a fire exit door through a shopfront in the Glenfield area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.