Survey, supply and set-up of automatic sliding doors for Greenwich premises all run under one contract, arranged from Great Barr. The usual pattern is 3 to 6 weeks to order after sign-off, then typically 1 to 3 days on site.
Surveys for Greenwich are booked with you directly. Tell us your quieter days and we'll work around them.

Where should you begin with automatic sliding doors in Greenwich?
In a parade in Greenwich with a narrow pavement, the sensor set-up is the first job. We'd angle the radar so people walking past don't trigger the door, and keep the leaves in line with the neighbouring frontage.
A corner unit in Greenwich can often move its entrance to the angle, where two directions of footfall meet. We'd look at a curved or canted door set, and check the wind on both streets before fixing the position.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Greenwich premises face south, the problem flips to reflections by day and fading stock.
What sign-off might you need for automatic sliding doors in Greenwich?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for automatic sliding doors at premises in the Greenwich area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Greenwich premises normally go to Royal Borough of Greenwich.
What price should you expect for automatic sliding doors in Greenwich?
Until the survey is done, plan on £3,895 to £11,995 plus VAT per entrance. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Greenwich |
|---|---|
| Area | Greater London |
| Postcode districts | SE10, SE12, SE3, SE7 |
| Planning authority | Royal Borough of Greenwich |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 110 miles |
| Survey | Free for new work |
Questions about automatic sliding doors in Greenwich
Can you match the door to my existing front in Greater London?
Yes. Frames come in any RAL colour, and we'd line up the leaves with your existing mullions so the door doesn't look like an add-on.
What do I need to arrange for a door in Greenwich?
Usually just a power supply near the head, and we'll tell you exactly what at survey. We can bring that into the one contract if you'd rather not chase an electrician.
Will an automatic door fit my Greenwich shop?
It depends on the width of the front and the depth at the head. A survey shows whether the parked leaves fit and where the operator can hide, and if a slider won't work we'd look at a powered swing door.
Do I need listed building consent for a shopfront in the Greenwich area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Do roller shutters need planning permission in the Greenwich area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.