Seen a frontage you admire? Bring the picture to our first talk about automatic sliding doors in Perth and Kinross, and we will work out what makes it succeed, from fascia depth to glass line, and what that means for your building.
What sits behind the existing fascia often decides the job. Old beams, abandoned cable runs and earlier frames are common finds, which is why our visit to Perth and Kinross premises looks past the surface before anything is drawn or priced for automatic sliding doors.

Where do you start with automatic sliding doors in Perth and Kinross?
Narrow fronts are the hard part. Across Perth and Kinross, we check first whether the parked leaves fit, then whether a telescopic set would give a wider opening on the same width.
If your premises in Perth and Kinross lose heat each time the door opens, the answer may be in the settings. Shorter hold-open times, a tighter sensor field and a night mode often cost less than new hardware, with an air curtain as the next step.
What consents apply to automatic sliding doors in Perth and Kinross?
Shutters aren't named in Class 9A, so in Scotland they usually fall to the appearance test. The same goes for automatic sliding doors at premises in the Perth and Kinross area: building work that materially affects the external appearance needs planning permission, and a true like-for-like usually doesn't. Ask the council to confirm the position for your site.
How much do automatic sliding doors cost in Perth and Kinross?
Until the survey is done, plan on £3,895 to £11,995 plus VAT per entrance. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Area | Perth and Kinross |
|---|---|
| Nation | Scotland |
| Towns covered | 1 |
| Main town | Perth |
| Planning regime | Scotland: 1997 Planning Act and the 1984 Advertisement Regulations |
| Building approval | Building warrant (Technical Handbook) |
| Survey | Free for new work, from our Great Barr base |
Questions about automatic sliding doors in Perth and Kinross
How long does an automatic door take for a site in Perth and Kinross?
Doors are typically ready 3 to 6 weeks after sign-off, and fitting typically takes 1 to 3 days. Electrical work needs booking in with the fit.
Who services automatic doors once they are fitted in Perth and Kinross?
Any competent door engineer can, and we'd recommend two visits a year. We'll talk you through the options at handover, so it doesn't get forgotten.
Can a door in Perth and Kinross be set up to ignore people walking past?
Yes, in most cases. The sensor field can be narrowed and angled so it reads direction, which cuts false openings on a street-facing door.
Do roller shutters need planning permission in the Perth and Kinross area?
Usually yes, if they materially affect the external appearance. Class 9A doesn't name shutters, so in Scotland treat them as falling to the appearance test rather than assuming a permitted development route. Ask the council before ordering, as this is a reading of the rules and not an official statement.
Do I need a building warrant for a shopfront in the Perth and Kinross area?
Usually yes in Scotland, if the work alters a wall or structure. Schedule 3 of the Building (Scotland) Regulations 2004 lists some work that needs no warrant, such as replacing a door or window with its frame, but the standards still apply. Shopfronts aren't named there, so ask the council before relying on it.