A bi-folding front lets a restaurant, bar or showroom in Wellington open fully to the street when the weather allows. We draw the panels, stack and threshold to your opening, so it closes up tight when the weather doesn't.
Bring whatever you have to the survey in Wellington: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

How would we approach bi-folding shopfronts for your Wellington premises?
For a restaurant group opening in Wellington, a bi-fold can carry the brand's look from site to site. We'd standardise the panel section, colour and hardware, then vary the panel count and stack side to suit each opening.
A deep recess can host a bi-fold set back from the street, which keeps the panels clear of passers-by and creates a sheltered pocket by the door. At Wellington premises with that depth, it's often the neatest layout.
If your Wellington unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
What consents could affect bi-folding shopfronts in Wellington?
For bi-folding shopfronts at premises in the Wellington area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Wellington applications for planning permission or advertisement consent are normally handled by Telford & Wrekin Council. Our survey includes a check of the position for your address.
What should you budget for bi-folding shopfronts in Wellington?
Our guide band is £5,195 to £13,995 plus VAT for a typical opening. Scope is the biggest lever, so a tighter brief for bi-folding shopfronts brings the figure down faster than any change of detail.
| Town | Wellington |
|---|---|
| Area | Shropshire |
| Postcode districts | TF1, TF5 |
| Planning authority | Telford & Wrekin Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 27 miles |
| Survey | Free for new work |
Questions about bi-folding shopfronts in Wellington
Can the threshold be level at my Wellington premises?
It can be close to level, depending on the floor and drainage. We'd check the levels at survey, because a track sitting flush with the pavement still needs somewhere for water to go.
Can my Wellington bi-fold be fitted around service?
Yes. Closed-day or out-of-hours fitting can be arranged to avoid your busiest sittings, and the job typically takes 2 to 4 days on site.
How secure is a folding front in Wellington overnight?
Very, if it is specified for the job. Each leaf locks top and bottom with concealed bolts, and laminated glass adds a second line of defence.
Do roller shutters need planning permission in the Wellington area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does the Equality Act apply to a shop entrance in the Wellington area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.