0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Bronze and metal shopfronts
  4. Bedfordshire

Bronze and metal shopfronts in Bedfordshire

One contract and one named contact for bronze and metal shopfronts across Bedfordshire.

Seen a frontage you admire? Bring the picture to our first talk about bronze and metal shopfronts in Bedfordshire, and we will work out what makes it succeed, from fascia depth to glass line, and what that means for your building.

Openings are rarely square or level, so the survey for bronze and metal shopfronts records diagonals, pavement fall and head height at several points. Those few millimetres decide whether the finished front sits true against the building.

Bronze-finished shopfront with slender metal frames, a brushed metal fascia and tall glass panes

What makes bronze and metal shopfronts work well for premises in Bedfordshire?

Long metal sections are awkward to move. For addresses across Bedfordshire, we decide on joint positions early, because a 4m fascia may need splitting for the route to site, and a hidden joint is far better than a dented panel.

Salt air changes the specification. If your premises in Bedfordshire sit near the coast, we'd look at grade 316 stainless fixings, tighter isolation between metals and a shorter care cycle for any live finish.

What consents apply to bronze and metal shopfronts in Bedfordshire?

Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for bronze and metal shopfronts at premises in the Bedfordshire area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.

How much do bronze and metal shopfronts cost in Bedfordshire?

Until the survey is done, plan on £7,995 to £24,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.

Bedfordshire at a glance
AreaBedfordshire
NationEngland
Towns covered10
Main townLuton
Planning regimeEngland: TCPA 1990 and the 2007 Advertisement Regulations
Building approvalBuilding Regulations (Approved Documents)
SurveyFree for new work, from our Great Barr base

Questions about bronze and metal shopfronts in Bedfordshire

How long does a metal front take for sites in Bedfordshire?

Making typically takes 8 to 14 weeks from approval, and fitting 3 to 7 days. Finish approval tends to be the stage that sets the pace.

Who cleans a bronze shopfront in Bedfordshire?

Your window cleaner can look after the glass, while the metal needs someone briefed on the finish. A short care note and a yearly check keep the two from getting mixed up.

Do you fit bronze and metal shopfronts in Bedfordshire?

Yes. We travel from Great Barr to survey and fit them, and every finish is agreed with you on a sample before anything is made.

Do I need listed building consent for a shopfront in the Bedfordshire area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Does a new shopfront in the Bedfordshire area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

Planning bronze and metal shopfronts in Bedfordshire?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price