0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Curtain walling
  4. Alton

Curtain walling in Alton

Measured at your Alton premises, never guessed from a photograph.

Curtain walling gives Alton premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.

A survey in Alton usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

Aluminium curtain walling with slim mullions across a two-storey commercial facade at dusk

How would we approach curtain walling for your Alton premises?

Where the building already has curtain walling, we test whether the brackets and framing can be reused. Keeping a sound frame and changing the glass and caps can give most of the result with far less disruption.

If the frontage joins a neighbouring building in Alton, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.

Where the footway outside your Alton premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.

What should you budget for curtain walling in Alton?

As a working budget, use £550 to £1,250 plus VAT per m². Your place inside that range for curtain walling depends mostly on how much of the existing frontage can stay and how much has to be put right first.

What consents could affect curtain walling in Alton?

For curtain walling at premises in the Alton area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

Planning and advert applications for Alton premises normally go to East Hampshire District Council. We check the position for your address at survey.

Alton at a glance
TownAlton
AreaHampshire
Postcode districtsGU34
Planning authorityEast Hampshire District Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 105 miles
SurveyFree for new work

Questions about curtain walling in Alton

Is curtain walling right for a single-storey unit in Alton?

Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.

How disruptive is curtain walling for neighbours in Alton?

Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.

Will you coordinate with my architect or main contractor in Alton?

Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.

Do I need listed building consent for a shopfront in the Alton area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Does a new shopfront in the Alton area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

Planning curtain walling in Alton?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price