Replacing tired glazing on Banstead premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.
It helps if you can be there when we visit Banstead, since five minutes walking the frontage together answers more than a long email.

How would we approach curtain walling for your Banstead premises?
Where your frontage in Banstead faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
If the ground floor of your Banstead premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Where the footway outside your Banstead premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
What should you budget for curtain walling in Banstead?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What consents could affect curtain walling in Banstead?
For curtain walling at premises in the Banstead area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
For Banstead, the usual route for planning and advert applications is through Reigate and Banstead Borough Council, and we confirm that when we visit.
| Town | Banstead |
|---|---|
| Area | Surrey |
| Postcode districts | KT17, KT18, SM2, SM7 |
| Planning authority | Reigate and Banstead Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 112 miles |
| Survey | Free for new work |
Questions about curtain walling in Banstead
What should I send before a survey of my Banstead premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Can you match the frames already on my Banstead building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Can part of an elevation in Banstead be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Do roller shutters need planning permission in the Banstead area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a shop sign in the Banstead area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.