From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Boston and the surrounding parts of Lincolnshire. One contract covers the frame, the glass and the junction with the shopfront below.
We measure your Boston opening in person, at a time agreed with you first, so the visit fits around your trading.

How do you design around the building when planning curtain walling in Boston?
Where the building already has curtain walling, we test whether the brackets and framing can be reused. Keeping a sound frame and changing the glass and caps can give most of the result with far less disruption.
If the frontage joins a neighbouring building in Boston, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Boston premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What might curtain walling cost in Boston?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What permissions should you check for curtain walling in Boston?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Boston area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Boston premises normally go to Boston Borough Council. We check the position for your address at survey.
| Town | Boston |
|---|---|
| Area | Lincolnshire |
| Postcode districts | PE21 |
| Planning authority | Boston Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 84 miles |
| Survey | Free for new work |
Questions about curtain walling in Boston
Is curtain walling right for a single-storey unit in Boston?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can you match the frames already on my Boston building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Can you replace failing curtain walling on premises in Boston?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Does a new shopfront in the Boston area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Do roller shutters need planning permission in the Boston area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.