Curtain walling gives Burton upon Trent premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
Bring whatever you have to the survey in Burton upon Trent: brand guidelines, lease plans, old drawings or a photo of a frontage you admire.

How would we approach curtain walling for your Burton upon Trent premises?
If your Burton upon Trent premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
Where the elevation faces south or west, solar control glass can do more for comfort than any blind. If it looks north, we would usually keep the glass clear and neutral, so the building does not turn dull on a grey day.
If your Burton upon Trent unit sits in a Victorian parade, the old pilasters usually set the rhythm, so a new front should land on them and not run past them. Keep that line and even a modern frame looks as though it belongs.
What should you budget for curtain walling in Burton upon Trent?
Until the survey is done, plan on £550 to £1,250 plus VAT per m². Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
What consents could affect curtain walling in Burton upon Trent?
For curtain walling at premises in the Burton upon Trent area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Burton upon Trent applications for planning permission or advertisement consent are normally handled by East Staffordshire Borough Council. Our survey includes a check of the position for your address.
| Town | Burton upon Trent |
|---|---|
| Area | Staffordshire |
| Postcode districts | DE14, DE15 |
| Planning authority | East Staffordshire Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 21 miles |
| Survey | Free for new work |
Questions about curtain walling in Burton upon Trent
What should I send before a survey of my Burton upon Trent premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Can you match the frames already on my Burton upon Trent building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Is curtain walling right for a single-storey unit in Burton upon Trent?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Does the Equality Act apply to a shop entrance in the Burton upon Trent area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Does a new shopfront in the Burton upon Trent area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.