Curtain walling gives Calcot premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Calcot, because what sits behind them can change the drawing.

How would we approach curtain walling for your Calcot premises?
If the frontage joins a neighbouring building in Calcot, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Calcot premises, since a shutter box or old beam may set the limit.
What should you budget for curtain walling in Calcot?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What consents could affect curtain walling in Calcot?
For curtain walling at premises in the Calcot area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Expect planning and advert applications here to go to West Berkshire Council in the normal way. We check what that means for your building when we survey it in Calcot.
| Town | Calcot |
|---|---|
| Area | Berkshire |
| Postcode districts | RG1, RG30, RG31, RG7 |
| Planning authority | West Berkshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 85 miles |
| Survey | Free for new work |
Questions about curtain walling in Calcot
Will you coordinate with my architect or main contractor in Calcot?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Is curtain walling right for a single-storey unit in Calcot?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can part of an elevation in Calcot be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Do roller shutters need planning permission in the Calcot area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a new shopfront in the Calcot area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.