Anyone weighing up a glazed elevation in Castle Vale needs frame, glass and fixings designed together. All three sit under one contract with S&K Glazing, with a named contact from survey to handover.
A survey in Castle Vale usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How do you design around the building when planning curtain walling in Castle Vale?
If the ground floor of your Castle Vale premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Unloading is worth thinking through early on any Castle Vale site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Castle Vale unit of that kind.
What permissions should you check for curtain walling in Castle Vale?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for curtain walling at premises in the Castle Vale area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Planning and advert applications for Castle Vale premises normally go to Birmingham City Council. We check the position for your address at survey.
What might curtain walling cost in Castle Vale?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Castle Vale |
|---|---|
| Area | West Midlands |
| Postcode districts | B24, B34, B35, B36 |
| Planning authority | Birmingham City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 5 miles |
| Survey | Free for new work |
Questions about curtain walling in Castle Vale
Can part of an elevation in Castle Vale be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Will you coordinate with my architect or main contractor in Castle Vale?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
What should I send before a survey of my Castle Vale premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
What rules apply to a fire exit door through a shopfront in the Castle Vale area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need planning permission to change a shopfront in the Castle Vale area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.