A double-height entrance in Haslemere deserves more than a stretched shopfront. Deeper aluminium sections carry the span, with sightlines kept as slim as the wind load allows.
Nothing gets ordered off the back of a survey in Haslemere, because its job is to give us the numbers to draw and price from.

Where should you begin with curtain walling in Haslemere?
If the frontage joins a neighbouring building in Haslemere, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
If the ground floor of your Haslemere premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Haslemere premises face south, the problem flips to reflections by day and fading stock.
What sign-off might you need for curtain walling in Haslemere?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Haslemere area: a planning application, or work that doesn't materially affect the external appearance.
Haslemere applications for planning permission or advertisement consent are normally handled by Waverley Borough Council. Our survey includes a check of the position for your address.
What price should you expect for curtain walling in Haslemere?
Guide price: £550 to £1,250 plus VAT per m². Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on curtain walling.
| Town | Haslemere |
|---|---|
| Area | Surrey |
| Postcode districts | GU26, GU27 |
| Planning authority | Waverley Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 113 miles |
| Survey | Free for new work |
Questions about curtain walling in Haslemere
Can you replace failing curtain walling on premises in Haslemere?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Is curtain walling right for a single-storey unit in Haslemere?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Who do I deal with during a curtain walling job in Haslemere?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
What rules apply to a fire exit door through a shopfront in the Haslemere area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Do I need listed building consent for a shopfront in the Haslemere area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.