From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Horley and the surrounding parts of Surrey. One contract covers the frame, the glass and the junction with the shopfront below.
Your survey is where the price gets real, because widths, heights, levels and access are all taken on site in Horley.

How do you design around the building when planning curtain walling in Horley?
Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.
Where the elevation faces south or west, solar control glass can do more for comfort than any blind. If it looks north, we would usually keep the glass clear and neutral, so the building does not turn dull on a grey day.
Where the footway outside your Horley premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
What might curtain walling cost in Horley?
Our guide band is £550 to £1,250 plus VAT per m². Scope is the biggest lever, so a tighter brief for curtain walling brings the figure down faster than any change of detail.
What permissions should you check for curtain walling in Horley?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Horley area: a planning application, or work that doesn't materially affect the external appearance.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Reigate and Banstead Borough Council.
| Town | Horley |
|---|---|
| Area | Surrey |
| Postcode districts | RH6 |
| Planning authority | Reigate and Banstead Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 121 miles |
| Survey | Free for new work |
Questions about curtain walling in Horley
Can part of an elevation in Horley be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Is curtain walling right for a single-storey unit in Horley?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can you match the frames already on my Horley building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Do I need planning permission to change a shopfront in the Horley area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Do I need listed building consent for a shopfront in the Horley area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.