Daylight deep into the floor plate is often what makes curtain walling worth the money. For Kirby Muxloe premises we weigh that against solar gain and glare, so the glass works in July as well as in January.
Measuring the opening is the easy part of a survey in Kirby Muxloe. We also look at the beam above, the pavement fall and any meters or drains nearby.

How would we approach curtain walling for your Kirby Muxloe premises?
If the ground floor of your Kirby Muxloe premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Kirby Muxloe premises on a slope look settled once that line is true.
What consents could affect curtain walling in Kirby Muxloe?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for curtain walling at premises in the Kirby Muxloe area, an application is then likely. The council confirms which side of that line a job falls on.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Kirby Muxloe premises normally go to Blaby District Council.
What should you budget for curtain walling in Kirby Muxloe?
Until the survey is done, plan on £550 to £1,250 plus VAT per m². Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
| Town | Kirby Muxloe |
|---|---|
| Area | Leicestershire |
| Postcode districts | LE19, LE3, LE6 |
| Planning authority | Blaby District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 29 miles |
| Survey | Free for new work |
Questions about curtain walling in Kirby Muxloe
Will you coordinate with my architect or main contractor in Kirby Muxloe?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
What should I send before a survey of my Kirby Muxloe premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Can part of an elevation in Kirby Muxloe be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Do roller shutters need planning permission in the Kirby Muxloe area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
What rules apply to a fire exit door through a shopfront in the Kirby Muxloe area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.