Curtain walling gives Longton premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
A survey in Longton usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How would we approach curtain walling for your Longton premises?
If your Longton premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
If the frontage joins a neighbouring building in Longton, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Longton premises face south, the problem flips to reflections by day and fading stock.
What consents could affect curtain walling in Longton?
For curtain walling at premises in the Longton area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
For Longton, the usual route for planning and advert applications is through Stoke-on-Trent City Council, and we confirm that when we visit.
What should you budget for curtain walling in Longton?
Allow £550 to £1,250 plus VAT per m². Size and specification set most of that figure for curtain walling, and the rest depends on what the survey finds on site.
| Town | Longton |
|---|---|
| Area | Staffordshire |
| Postcode districts | ST12, ST2, ST3, ST4 |
| Planning authority | Stoke-on-Trent City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 31 miles |
| Survey | Free for new work |
Questions about curtain walling in Longton
Can you replace failing curtain walling on premises in Longton?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Who do I deal with during a curtain walling job in Longton?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Can you match the frames already on my Longton building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Do I need listed building consent for a shopfront in the Longton area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Do I need planning permission to change a shopfront in the Longton area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.