For a facade in Maltby, the grid matters more than any single pane. Mullions, transoms and spandrels are drawn together so the elevation reads as one composition from across the road.
Surveys for Maltby are booked with you directly. Tell us your quieter days and we'll work around them.

How do you design around the building when planning curtain walling in Maltby?
Unloading is worth thinking through early on any Maltby site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
If your Maltby premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Maltby, carry the fascia and glass line round the corner and treat both faces as one composition.
What permissions should you check for curtain walling in Maltby?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for curtain walling at premises in the Maltby area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Maltby applications for planning permission or advertisement consent are normally handled by Rotherham Metropolitan Borough Council. Our survey includes a check of the position for your address.
What might curtain walling cost in Maltby?
Our guide band is £550 to £1,250 plus VAT per m². Scope is the biggest lever, so a tighter brief for curtain walling brings the figure down faster than any change of detail.
| Town | Maltby |
|---|---|
| Area | South Yorkshire |
| Postcode districts | S25, S66 |
| Planning authority | Rotherham Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 67 miles |
| Survey | Free for new work |
Questions about curtain walling in Maltby
Will you coordinate with my architect or main contractor in Maltby?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Is curtain walling right for a single-storey unit in Maltby?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can you match the frames already on my Maltby building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
What rules apply to a fire exit door through a shopfront in the Maltby area?
It must open in the direction of escape and can't be locked against immediate use, and a dedicated fire exit can't be a sliding or revolving door. In England that comes from article 14(2) of the Regulatory Reform (Fire Safety) Order 2005, and the duty sits with the responsible person, normally the employer or whoever controls the premises for a business, otherwise the owner. An outward door can clash with section 153 of the Highways Act 1980 where it opens onto the footway, so raise it early.
Does the Equality Act apply to a shop entrance in the Maltby area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.