Replacing tired glazing on Marple premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.
A survey in Marple usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

What should you think about before commissioning curtain walling in Marple?
Where the elevation faces south or west, solar control glass can do more for comfort than any blind. If it looks north, we would usually keep the glass clear and neutral, so the building does not turn dull on a grey day.
If the ground floor of your Marple premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If the pavement falls across your frontage, let the stallriser take up the slope and keep the glass line dead level. The eye reads the long horizontal, so Marple premises on a slope look settled once that line is true.
What is a realistic budget for curtain walling in Marple?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Who approves curtain walling in Marple?
For curtain walling at premises in the Marple area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Expect planning and advert applications here to go to Stockport Metropolitan Borough Council in the normal way. We check what that means for your building when we survey it in Marple.
| Town | Marple |
|---|---|
| Area | Greater Manchester |
| Postcode districts | SK12, SK2, SK22, SK6 |
| Planning authority | Stockport Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 59 miles |
| Survey | Free for new work |
Questions about curtain walling in Marple
What should I send before a survey of my Marple premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Can you match the frames already on my Marple building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
How disruptive is curtain walling for neighbours in Marple?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
Does the Equality Act apply to a shop entrance in the Marple area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Do I need listed building consent for a shopfront in the Marple area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.