Curtain walling gives Marshalswick premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
A survey in Marshalswick usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

What should you think about before commissioning curtain walling in Marshalswick?
If the frontage joins a neighbouring building in Marshalswick, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
If the ground floor of your Marshalswick premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If you trade after dark in Marshalswick, the view in matters more than the sign. A warm, evenly lit interior with light on the back wall will usually do more than a brighter fascia, because it gives the eye somewhere to go.
Who approves curtain walling in Marshalswick?
For curtain walling at premises in the Marshalswick area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
For Marshalswick, the usual route for planning and advert applications is through St Albans City and District Council, and we confirm that when we visit.
What is a realistic budget for curtain walling in Marshalswick?
A sensible starting budget is £550 to £1,250 plus VAT per m². What shifts the figure is whatever can't be seen yet, such as the condition behind the old frontage or the services running through it.
| Town | Marshalswick |
|---|---|
| Area | Hertfordshire |
| Postcode districts | AL1, AL2, AL3, AL4 |
| Planning authority | St Albans City and District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 87 miles |
| Survey | Free for new work |
Questions about curtain walling in Marshalswick
Can part of an elevation in Marshalswick be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Is curtain walling right for a single-storey unit in Marshalswick?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
What should I send before a survey of my Marshalswick premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Do I need listed building consent for a shopfront in the Marshalswick area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does the Equality Act apply to a shop entrance in the Marshalswick area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.