Showrooms, hotels and offices in Newburn can reach the point where glass has to pass a floor edge, and that is where curtain walling takes over from a shopfront. You see every mullion and transom on scale drawings before anything is ordered.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

How would we approach curtain walling for your Newburn premises?
If the ground floor of your Newburn premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Unloading is worth thinking through early on any Newburn site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
If there are storeys above the shop, the frontage should feel like the base of the building and not a sign stuck on it. Lining up mullions with the windows overhead is a small move that settles the whole elevation at Newburn premises.
What should you budget for curtain walling in Newburn?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What consents could affect curtain walling in Newburn?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for curtain walling at premises in the Newburn area, an application is then likely. The council confirms which side of that line a job falls on.
Planning and advert applications for Newburn premises normally go to Newcastle City Council. We check the position for your address at survey.
| Town | Newburn |
|---|---|
| Area | Tyne and Wear |
| Postcode districts | NE15, NE5 |
| Planning authority | Newcastle City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 169 miles |
| Survey | Free for new work |
Does Newcastle City Council publish shopfront guidance?
Yes, Shopfronts in the historic environment (2011). It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- Fascias should generally take up no more than 20% of the shopfront height, with lettering no more than two-thirds of the fascia height.
- Solid external roller shutters are treated as harmful to appearance, with internal lattice grilles offered as a good alternative.
- No shopfront sign should be internally lit, and whole plastic fascias are not acceptable.
Questions about curtain walling in Newburn
What should I send before a survey of my Newburn premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Can you replace failing curtain walling on premises in Newburn?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Can you match the frames already on my Newburn building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Do I need listed building consent for a shopfront in the Newburn area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does a new shopfront in the Newburn area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.