Curtain walling gives Oxted premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Oxted, because what sits behind them can change the drawing.

What should you think about before commissioning curtain walling in Oxted?
If the ground floor of your Oxted premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If your Oxted premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Oxted unit of that kind.
Who approves curtain walling in Oxted?
For curtain walling at premises in the Oxted area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Planning and advert applications for Oxted premises normally go to Tandridge District Council. We check the position for your address at survey.
What is a realistic budget for curtain walling in Oxted?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Town | Oxted |
|---|---|
| Area | Surrey |
| Postcode districts | CR3, RH8, RH9, TN16 |
| Planning authority | Tandridge District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 121 miles |
| Survey | Free for new work |
Questions about curtain walling in Oxted
Can part of an elevation in Oxted be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Can you match the frames already on my Oxted building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
How disruptive is curtain walling for neighbours in Oxted?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
Does a new shopfront in the Oxted area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Does a shop sign in the Oxted area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.