Curtain walling gives Rochdale premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.
Measuring the opening is the easy part of a survey in Rochdale. We also look at the beam above, the pavement fall and any meters or drains nearby.

What goes into getting curtain walling right in Rochdale?
If the ground floor of your Rochdale premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If the frontage joins a neighbouring building in Rochdale, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Rochdale unit of that kind.
How much could curtain walling in Rochdale cost you?
Guide price: £550 to £1,250 plus VAT per m². Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on curtain walling.
Which applications might curtain walling in Rochdale involve?
For curtain walling at premises in the Rochdale area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Rochdale premises normally go to Rochdale Metropolitan Borough Council.
| Town | Rochdale |
|---|---|
| Area | Greater Manchester |
| Postcode districts | OL11, OL12, OL15, OL16 |
| Planning authority | Rochdale Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 75 miles |
| Survey | Free for new work |
Questions about curtain walling in Rochdale
What should I send before a survey of my Rochdale premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Can part of an elevation in Rochdale be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Can you replace failing curtain walling on premises in Rochdale?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Do roller shutters need planning permission in the Rochdale area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a shop sign in the Rochdale area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.