From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Ross-on-Wye and the surrounding parts of Herefordshire. One contract covers the frame, the glass and the junction with the shopfront below.
Nothing gets ordered off the back of a survey in Ross-on-Wye, because its job is to give us the numbers to draw and price from.

How do you design around the building when planning curtain walling in Ross-on-Wye?
If the ground floor of your Ross-on-Wye premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Where the building already has curtain walling, we test whether the brackets and framing can be reused. Keeping a sound frame and changing the glass and caps can give most of the result with far less disruption.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Ross-on-Wye premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What might curtain walling cost in Ross-on-Wye?
Until the survey is done, plan on £550 to £1,250 plus VAT per m². Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.
What permissions should you check for curtain walling in Ross-on-Wye?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Ross-on-Wye area: a planning application, or work that doesn't materially affect the external appearance.
We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Ross-on-Wye premises normally go to Herefordshire Council.
| Town | Ross-on-Wye |
|---|---|
| Area | Herefordshire |
| Postcode districts | HR9 |
| Planning authority | Herefordshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 52 miles |
| Survey | Free for new work |
Questions about curtain walling in Ross-on-Wye
Will you coordinate with my architect or main contractor in Ross-on-Wye?
Yes. We can work to their drawings and programme, and we supply shop drawings for their review before anything is made. Your named contact stays the single route for questions on our package.
Can you match the frames already on my Ross-on-Wye building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Can part of an elevation in Ross-on-Wye be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Do I need planning permission to change a shopfront in the Ross-on-Wye area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Does a shop sign in the Ross-on-Wye area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.