From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Rowley Regis and the surrounding parts of the West Midlands. One contract covers the frame, the glass and the junction with the shopfront below.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What makes curtain walling work well on Rowley Regis premises?
Where the elevation faces south or west, solar control glass can do more for comfort than any blind. If it looks north, we would usually keep the glass clear and neutral, so the building does not turn dull on a grey day.
If the ground floor of your Rowley Regis premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Rowley Regis unit of that kind.
Could curtain walling in Rowley Regis need planning permission?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Rowley Regis area: a planning application, or work that doesn't materially affect the external appearance.
For Rowley Regis, the usual route for planning and advert applications is through Sandwell Metropolitan Borough Council, and we confirm that when we visit.
How much should you set aside for curtain walling in Rowley Regis?
Allow £550 to £1,250 plus VAT per m². Size and specification set most of that figure for curtain walling, and the rest depends on what the survey finds on site.
| Town | Rowley Regis |
|---|---|
| Area | West Midlands |
| Postcode districts | B64, B65, B69, DY2 |
| Planning authority | Sandwell Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 7 miles |
| Survey | Free for new work |
Questions about curtain walling in Rowley Regis
How disruptive is curtain walling for neighbours in Rowley Regis?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
Can part of an elevation in Rowley Regis be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
What should I send before a survey of my Rowley Regis premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Does a new shopfront in the Rowley Regis area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Does a shop sign in the Rowley Regis area need advertisement consent?
Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.