A double-height entrance in Royston deserves more than a stretched shopfront. Deeper aluminium sections carry the span, with sightlines kept as slim as the wind load allows.
A survey in Royston usually starts outside, looking at the whole elevation before any tape comes out, because the frontage has to answer the building above it.

How do you design around the building when planning curtain walling in Royston?
Should the floors above stay occupied, the work can be phased bay by bay, with temporary weathering at the end of each shift. Tenants keep their rooms dry and the old elevation comes out in an order that suits the building.
If the ground floor of your Royston premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
On a north-facing frontage the glass stays free of glare, but the interior can look dim from the street, so lighting needs to sit closer to the window. If your Royston premises face south, the problem flips to reflections by day and fading stock.
What might curtain walling cost in Royston?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What permissions should you check for curtain walling in Royston?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Royston area: a planning application, or work that doesn't materially affect the external appearance.
For Royston, the usual route for planning and advert applications is through North Hertfordshire District Council, and we confirm that when we visit.
| Town | Royston |
|---|---|
| Area | Hertfordshire |
| Postcode districts | SG8 |
| Planning authority | North Hertfordshire District Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 87 miles |
| Survey | Free for new work |
Questions about curtain walling in Royston
Can you match the frames already on my Royston building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
Is curtain walling right for a single-storey unit in Royston?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Who do I deal with during a curtain walling job in Royston?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Does the Equality Act apply to a shop entrance in the Royston area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.
Does a new shopfront in the Royston area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.