0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Curtain walling
  4. Selby

Curtain walling in Selby

A frontage for Selby premises, drawn first and ordered later.

Replacing tired glazing on Selby premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.

Surveys for Selby are booked with you directly. Tell us your quieter days and we'll work around them.

Aluminium curtain walling with slim mullions across a two-storey commercial facade at dusk

What goes into getting curtain walling right in Selby?

Where your frontage in Selby faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.

If your Selby premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.

A corner unit has two fronts to think about, and the return elevation often does as much selling as the main one. If that is your layout in Selby, carry the fascia and glass line round the corner and treat both faces as one composition.

Which applications might curtain walling in Selby involve?

For curtain walling at premises in the Selby area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

We confirm the position at survey, because a boundary or a special designation can change who handles the file, but applications from Selby premises normally go to North Yorkshire Council.

How much could curtain walling in Selby cost you?

Our guide band is £550 to £1,250 plus VAT per m². Scope is the biggest lever, so a tighter brief for curtain walling brings the figure down faster than any change of detail.

Selby at a glance
TownSelby
AreaNorth Yorkshire
Postcode districtsYO8
Planning authorityNorth Yorkshire Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 92 miles
SurveyFree for new work

Questions about curtain walling in Selby

Can you match the frames already on my Selby building?

Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.

What should I send before a survey of my Selby premises?

The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.

Is curtain walling right for a single-storey unit in Selby?

Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.

Do I need planning permission to change a shopfront in the Selby area?

Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.

Do I need listed building consent for a shopfront in the Selby area?

Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.

Planning curtain walling in Selby?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price