Anyone weighing up a glazed elevation in Shepton Mallet needs frame, glass and fixings designed together. All three sit under one contract with S&K Glazing, with a named contact from survey to handover.
It helps if you can be there when we visit Shepton Mallet, since five minutes walking the frontage together answers more than a long email.

What makes curtain walling work well on Shepton Mallet premises?
If the frontage joins a neighbouring building in Shepton Mallet, we draw that junction in full at design stage. The last mullion, the flashing and the movement joint are details people notice from the pavement.
Where the building already has curtain walling, we test whether the brackets and framing can be reused. Keeping a sound frame and changing the glass and caps can give most of the result with far less disruption.
Where units share one long run of fascia, breaking the height makes you stand out for the wrong reason. If that describes your Shepton Mallet parade, keep the line and win attention with lettering, lighting and what's in the window.
How much should you set aside for curtain walling in Shepton Mallet?
As a working budget, use £550 to £1,250 plus VAT per m². Your place inside that range for curtain walling depends mostly on how much of the existing frontage can stay and how much has to be put right first.
Could curtain walling in Shepton Mallet need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for curtain walling at premises in the Shepton Mallet area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Expect planning and advert applications here to go to Somerset Council in the normal way. We check what that means for your building when we survey it in Shepton Mallet.
| Town | Shepton Mallet |
|---|---|
| Area | Somerset |
| Postcode districts | BA4 |
| Planning authority | Somerset Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 98 miles |
| Survey | Free for new work |
Questions about curtain walling in Shepton Mallet
Can part of an elevation in Shepton Mallet be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
What should I send before a survey of my Shepton Mallet premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Who do I deal with during a curtain walling job in Shepton Mallet?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Do I need listed building consent for a shopfront in the Shepton Mallet area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does a new shopfront in the Shepton Mallet area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.