Showrooms, hotels and offices in Solihull can reach the point where glass has to pass a floor edge, and that is where curtain walling takes over from a shopfront. You see every mullion and transom on scale drawings before anything is ordered.
It helps if you can be there when we visit Solihull, since five minutes walking the frontage together answers more than a long email.

How would we approach curtain walling for your Solihull premises?
Where the elevation faces south or west, solar control glass can do more for comfort than any blind. If it looks north, we would usually keep the glass clear and neutral, so the building does not turn dull on a grey day.
Unloading is worth thinking through early on any Solihull site with restricted access. Mullions can run to 6m or more, so we look at lifting routes, storage and where a delivery can stop.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Solihull unit of that kind.
What consents could affect curtain walling in Solihull?
A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for curtain walling at premises in the Solihull area, an application is then likely. The council confirms which side of that line a job falls on.
For Solihull, the usual route for planning and advert applications is through Solihull Metropolitan Borough Council, and we confirm that when we visit.
What should you budget for curtain walling in Solihull?
As a working budget, use £550 to £1,250 plus VAT per m². Your place inside that range for curtain walling depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Town | Solihull |
|---|---|
| Area | West Midlands |
| Postcode districts | B28, B90, B91, B92 |
| Planning authority | Solihull Metropolitan Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 11 miles |
| Survey | Free for new work |
Questions about curtain walling in Solihull
How disruptive is curtain walling for neighbours in Solihull?
Most disruption comes from access equipment and deliveries, not from noisy work. We plan unloading and any scaffold around nearby premises, and we keep the working area screened and tidy at the end of each shift.
Is curtain walling right for a single-storey unit in Solihull?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Can you replace failing curtain walling on premises in Solihull?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Do roller shutters need planning permission in the Solihull area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does a new shopfront in the Solihull area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.