Replacing tired glazing on Stafford premises is often a chance to rethink the whole elevation. We survey the existing frame and fixings, then advise whether a new curtain wall or a more modest reglaze makes sense.
Measuring the opening is the easy part of a survey in Stafford. We also look at the beam above, the pavement fall and any meters or drains nearby.

What goes into getting curtain walling right in Stafford?
Where the building already has curtain walling, we test whether the brackets and framing can be reused. Keeping a sound frame and changing the glass and caps can give most of the result with far less disruption.
If your Stafford premises have a concrete frame, we open up a sample of slab edges at survey and plan brackets around what is really there. Steel frames and older masonry piers each need a different fixing, so nothing is priced from assumptions.
Where the footway outside your Stafford premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.
Which applications might curtain walling in Stafford involve?
For curtain walling at premises in the Stafford area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.
Stafford applications for planning permission or advertisement consent are normally handled by Stafford Borough Council. Our survey includes a check of the position for your address.
How much could curtain walling in Stafford cost you?
Our guide band is £550 to £1,250 plus VAT per m². Scope is the biggest lever, so a tighter brief for curtain walling brings the figure down faster than any change of detail.
| Town | Stafford |
|---|---|
| Area | Staffordshire |
| Postcode districts | ST16, ST17 |
| Planning authority | Stafford Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 20 miles |
| Survey | Free for new work |
Questions about curtain walling in Stafford
Can you match the frames already on my Stafford building?
Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.
What should I send before a survey of my Stafford premises?
The address, a few photographs and any existing drawings are enough to start. Tell us how the building is used and which floors stay occupied, because that shapes the access plan.
Is curtain walling right for a single-storey unit in Stafford?
Usually not. A well-designed aluminium shopfront will span most single-storey openings with slimmer sections and lower cost. Curtain walling starts to make sense once the glass runs past a floor edge or the opening is unusually tall.
Do I need planning permission to change a shopfront in the Stafford area?
Usually yes, if the work materially affects the building's external appearance. England's shop permitted development rights exclude creating, altering or replacing a shopfront, so there is no shortcut. A true like-for-like replacement usually needs no application, and the council confirms the position.
Do roller shutters need planning permission in the Stafford area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.