From a single-bay stair tower to a full frontage, we design and fit curtain walling for premises in Swanscombe and the surrounding parts of Kent. One contract covers the frame, the glass and the junction with the shopfront below.
Please have keys to any meter cupboards and shutter housings to hand when we survey in Swanscombe, because what sits behind them can change the drawing.

Where should you begin with curtain walling in Swanscombe?
Where your frontage in Swanscombe faces open ground, wind load can push mullions a size deeper than a sheltered terrace would need. We check exposure for your elevation, so the sections are no heavier than they have to be.
If the ground floor of your Swanscombe premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Swanscombe premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What price should you expect for curtain walling in Swanscombe?
We would budget £550 to £1,250 plus VAT per m². Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
What sign-off might you need for curtain walling in Swanscombe?
England has no permitted development route for changing a shopfront. Part 7 Class A of the General Permitted Development Order 2015 excludes creating, altering or replacing one, and it allows no alterations at all on article 2(3) land. That leaves two outcomes for curtain walling at premises in the Swanscombe area: a planning application, or work that doesn't materially affect the external appearance.
Planning and advert applications for Swanscombe premises normally go to Dartford Borough Council. We check the position for your address at survey.
| Town | Swanscombe |
|---|---|
| Area | Kent |
| Postcode districts | DA10 |
| Planning authority | Dartford Borough Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 121 miles |
| Survey | Free for new work |
Questions about curtain walling in Swanscombe
Can part of an elevation in Swanscombe be done first?
Yes, provided the break falls at a sensible mullion. Phasing can spread cost and disruption, although two visits usually cost more than one. We would draw the whole elevation first so the second phase matches.
Can you replace failing curtain walling on premises in Swanscombe?
Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.
Who do I deal with during a curtain walling job in Swanscombe?
You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.
Does a new shopfront in the Swanscombe area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.
Do roller shutters need planning permission in the Swanscombe area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.