0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Curtain walling
  4. Winchester

Curtain walling in Winchester

Measured at your Winchester premises, never guessed from a photograph.

Curtain walling gives Winchester premises a glazed elevation that runs past the floor edges, where a standard shopfront frame would run out of span. We measure the structure first, then set the grid out to suit the building.

We measure your Winchester opening in person, at a time agreed with you first, so the visit fits around your trading.

Aluminium curtain walling with slim mullions across a two-storey commercial facade at dusk

How would we approach curtain walling for your Winchester premises?

If the ground floor of your Winchester premises is a shop, we carry the curtain wall grid down into the shopfront below. Door heads, fascia line and transoms then line up by design.

Where the elevation faces south or west, solar control glass can do more for comfort than any blind. If it looks north, we would usually keep the glass clear and neutral, so the building does not turn dull on a grey day.

Where the footway outside your Winchester premises is narrow, a recessed entrance earns its keep. It gives people a dry place to pause out of the walkway, and it adds a longer run of display glass either side of the door.

What should you budget for curtain walling in Winchester?

As a working budget, use £550 to £1,250 plus VAT per m². Your place inside that range for curtain walling depends mostly on how much of the existing frontage can stay and how much has to be put right first.

What consents could affect curtain walling in Winchester?

For curtain walling at premises in the Winchester area, the deciding question in England is whether the building work materially affects the external appearance. If it does, planning permission is needed, while a true like-for-like replacement usually needs none. The council confirms the position for each site.

For Winchester, the usual route for planning and advert applications is through Winchester City Council, and we confirm that when we visit.

Winchester at a glance
TownWinchester
AreaHampshire
Postcode districtsSO21, SO22, SO23
Planning authorityWinchester City Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 106 miles
SurveyFree for new work

Questions about curtain walling in Winchester

Can you replace failing curtain walling on premises in Winchester?

Yes. We survey the frame, brackets and seals first, because some elevations only need new glass and gaskets. If the frame itself has failed, we draw a replacement that can be phased around the building's use.

Can you match the frames already on my Winchester building?

Usually, yes. Colour can be matched to a RAL reference or a sample, and cap profiles can be chosen to sit close to what is there. An exact match on an old system may not be possible, in which case we would suggest a deliberate change at a natural break.

Who do I deal with during a curtain walling job in Winchester?

You have one named contact from survey to handover. The contract is with S&K Glazing Limited, and vetted teams working under S&K Glazing carry out the work.

Does a new shopfront in the Winchester area need Building Regulations approval?

Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.

Do roller shutters need planning permission in the Winchester area?

Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.

Planning curtain walling in Winchester?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price