What should your premises say from across the road? We open every conversation about curved glass shopfronts in Mid Glamorgan with that question, then treat sightlines and proportion as seriously as the budget.
What sits behind the existing fascia often decides the job. Old beams, abandoned cable runs and earlier frames are common finds, which is why our visit to Mid Glamorgan premises looks past the surface before anything is drawn or priced for curved glass shopfronts.

How should you approach curved glass shopfronts in Mid Glamorgan?
Delivery shapes the design. A curved pane can't travel like flat glass, so for addresses in Mid Glamorgan we check the route, the lifting space and the turning circle before agreeing pane sizes.
If your building in Mid Glamorgan already has an old curved pane, we'd look at keeping it first. Older bent glass is hard to replicate, and a careful repair of the frame may save the piece that gives the front its character.
What consents apply to curved glass shopfronts in Mid Glamorgan?
Going by Part 42 of the 1995 Order as inserted in 2014, Wales has no permitted development route for changing a shopfront. The right covers A1 and A2 premises, but it excludes creating, altering or replacing a shopfront, or fitting or replacing a security grill or shutter on one, and it doesn't apply on Article 1(5) land. For curved glass shopfronts at premises in the Mid Glamorgan area, that leaves a planning application, or work that leaves the appearance materially unchanged.
How much do curved glass shopfronts cost in Mid Glamorgan?
As a working budget, use £6,995 to £19,995 plus VAT for a typical frontage. Your place inside that range for curved glass shopfronts depends mostly on how much of the existing frontage can stay and how much has to be put right first.
| Area | Mid Glamorgan |
|---|---|
| Nation | Wales |
| Towns covered | 17 |
| Main town | Bridgend |
| Planning regime | Wales: TCPA 1990 and the 1992 Advertisement Regulations |
| Building approval | Building Regulations (Approved Documents for Wales) |
| Survey | Free for new work, from our Great Barr base |
Does Rhondda Cynon Taf County Borough Council publish shopfront guidance?
Yes, Shopfront Design. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- External roller shutters are a last resort after other security options are shown to be unsuitable.
- Solid metal shutters are unlikely to be acceptable, while lattice or brick-bond grille shutters may be considered.
- Individual shutters covering only the glazing are one option, and powder coating is generally preferred to paint.
Questions about curved glass shopfronts in Mid Glamorgan
Is a faceted front a sensible alternative in Mid Glamorgan?
Often, yes, especially on a wide radius. Narrow flat panes give a soft curve from a distance, cost less and are far simpler to replace.
Can the old curved pane at my Mid Glamorgan premises be reused?
Sometimes, if it is sound and can be taken out safely. We'd examine it at survey and tell you honestly whether repairing around it is the safer choice.
How do you measure a curve at premises in Bridgend?
At three heights, using a plywood template or a laser survey. That shows whether the corner is a true arc, and tells us where any difference has to be taken up.
Can a roller shutter go on a shop in the Mid Glamorgan area without planning permission?
Usually not in Wales. Part 42 of the 1995 Order, as inserted in 2014, excludes installing or replacing a security grill or shutter on a shopfront, so the rights for shops don't help. The only way to avoid an application is work that doesn't materially affect the appearance, and the council confirms that.
What access duty applies to a shop in the Mid Glamorgan area?
The Equality Act 2010 applies, in Wales as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it covers disabled people generally. A feature that meets a design standard is generally protected for 10 years.