We design, make and fit fascia signage in Calne and across Wiltshire, as one job under one contract. Removal of the old sign, repairs behind it and the new sign all sit on one itemised quotation.
Expect us to measure the opening, photograph the existing front and check how materials will reach it on the day, at a time you have agreed.

What makes fascia signage work well on Calne premises?
On a corner plot, the sign has to turn the corner cleanly. We set letter size and panel joints so the name reads from both streets, with the return falling at a natural break.
If the wall above your Calne shop is brick or stone, letters fixed straight to it may look better than a panel. We check the surface first, since soft brick needs a different fixing from hard stone.
Where a fascia has crept down over the years, lifting it back to its original line can add real height to the glass. Check what sits behind it first at Calne premises, since a shutter box or old beam may set the limit.
How much should you set aside for fascia signage in Calne?
We would budget £395 to £1,995 plus VAT per sign. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
Could fascia signage in Calne need planning permission?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for fascia signage at premises in the Calne area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
In England, signs at premises in the Calne area come under the 2007 Advertisement Regulations. An unlit fascia sign generally needs no application under Class 5 of Schedule 3 if it sits on a wall containing a shop window, tops out at 4.6m or the first-floor sill if that is lower, and keeps letters to 0.75m high. Displaying a sign without the consent it needs is a criminal offence, so check before it goes up.
Planning and advert applications for Calne premises normally go to Wiltshire Council. We check the position for your address at survey.
| Town | Calne |
|---|---|
| Area | Wiltshire |
| Postcode districts | SN11 |
| Planning authority | Wiltshire Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 77 miles |
| Survey | Free for new work |
Questions about fascia signage in Calne
What if the fascia behind my old sign in Calne is rotten?
We show you photographs and price the repair before going further. A short section of timber can often be spliced in, while a badly decayed fascia is better replaced with a new subframe.
Can a fascia sign in Calne be lit later on?
Yes, if the sign is planned for it. Built-up letters can take halo lighting when the panel and cable route are prepared at the start, which costs far less than adapting them afterwards.
Will a new sign suit the rest of my Calne frontage?
That is what the scale drawing is for. We draw the sign on your actual elevation with door, windows and stallriser in place, so you can judge colour and proportion together.
Do I need listed building consent for a shopfront in the Calne area?
Usually yes, if the building is listed. In England the local planning authority decides, and Historic England is notified of Grade I and II* works and specified Grade II works. Like-for-like repair may not need consent, so ask the council before work starts.
Does a new shopfront in the Calne area need Building Regulations approval?
Assume yes until building control says otherwise. England has no like-for-like exemption, though registered installers can self-certify replacement windows and doors in non-dwellings. That route doesn't cover structural glass, curtain walling or revolving doors.