We design, make and fit fascia signage in Cheetham Hill and across Greater Manchester, as one job under one contract. Removal of the old sign, repairs behind it and the new sign all sit on one itemised quotation.
Your survey is where the price gets real, because widths, heights, levels and access are all taken on site in Cheetham Hill.

Where should you begin with fascia signage in Cheetham Hill?
A deep fascia above a low shopfront can often be reduced on the drawing board. If your Cheetham Hill premises have one, we would show you a slimmer panel option, with the ceiling line behind it adjusted to suit.
If the wall above your Cheetham Hill shop is brick or stone, letters fixed straight to it may look better than a panel. We check the surface first, since soft brick needs a different fixing from hard stone.
If your premises were once two shops, decide early whether the front should read as one or as two. One continuous fascia with a repeated bay width usually settles the elevation better than two mismatched halves, which is worth testing on any Cheetham Hill unit of that kind.
What sign-off might you need for fascia signage in Cheetham Hill?
Security grilles and shutters are named in England's rules: installing or replacing one on a shopfront sits outside the shop permitted development rights. The frontage itself is treated the same way, so for fascia signage at premises in the Cheetham Hill area, building work that materially affects the appearance needs planning permission. Confirm the position with the council before anything is ordered.
Lighting moves a sign out of Class 5 in England, because that class allows illumination only for medical-type notices. Class 4B then applies at premises in the Cheetham Hill area: halo or character-only lighting, static, with the lowest part at least 2.5m up. Brightness is capped at 600 cd/m² on signs up to 10m² and 300 cd/m² above that, and anything outside these limits needs advertisement consent.
Cheetham Hill applications for planning permission or advertisement consent are normally handled by Manchester City Council. Our survey includes a check of the position for your address.
What price should you expect for fascia signage in Cheetham Hill?
Guide price: £395 to £1,995 plus VAT per sign. Materials, finish and the amount of drawing and coordination involved all move it, and your itemised quotation shows where the money goes on fascia signage.
| Town | Cheetham Hill |
|---|---|
| Area | Greater Manchester |
| Postcode districts | M4, M60, M7, M8 |
| Planning authority | Manchester City Council |
| Building approval | Building Regulations (Approved Documents) |
| Distance from Great Barr | About 67 miles |
| Survey | Free for new work |
Does Manchester City Council publish shopfront guidance?
Yes, Shopfront and Signage Design Guide. It tells applicants what the council expects from new and altered shopfronts. A few of the things it asks for:
- External shutters are generally not permitted, and any exceptional case must be at least 50% transparent, sit within the shopfront frame and hide its box behind the fascia.
- Internally lit lightbox signage is not permitted for new signs, and external lighting such as discreet spotlights is preferred.
- New signage is limited to one fascia or internal hanging sign per elevation, with a maximum depth of 30mm.
Questions about fascia signage in Cheetham Hill
Can a new fascia sign in Cheetham Hill be fitted on a closed day?
Yes, we can arrange that, or fit out of hours if that suits you better. Most fascia signs take about a day, so the work can often go into your quietest trading hours.
Can a fascia sign in Cheetham Hill be lit later on?
Yes, if the sign is planned for it. Built-up letters can take halo lighting when the panel and cable route are prepared at the start, which costs far less than adapting them afterwards.
What if the fascia behind my old sign in Cheetham Hill is rotten?
We show you photographs and price the repair before going further. A short section of timber can often be spliced in, while a badly decayed fascia is better replaced with a new subframe.
Do roller shutters need planning permission in the Cheetham Hill area?
Usually yes. Installing or replacing a security grill or shutter on a shopfront is expressly outside England's shop permitted development rights, so the only way to avoid an application is work that doesn't materially affect the appearance. Ask the council before ordering.
Does the Equality Act apply to a shop entrance in the Cheetham Hill area?
Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.