Premises in Montrose can have anything from a shallow sign band to a deep boxed-out panel. We work with what the building gives you and, where it helps, take an oversized fascia back to a better depth.
Surveys for Montrose are booked with you directly. Tell us your quieter days and we'll work around them.

How do you design around the building when planning fascia signage in Montrose?
Where the fascia on your Montrose premises has been overclad, we lift a sample at survey to see what is underneath. Original timber, cornice mouldings or tile may be worth keeping, and they change what the new sign should be.
If your Montrose unit sits in a parade of similar shops, we would look at the fascia line on either side before setting your sign height. Holding that line usually looks more confident than trying to outgrow it.
Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Montrose premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.
What might fascia signage cost in Montrose?
The guide for fascia signage is £395 to £1,995 plus VAT per sign. Expect the lower end for simple work with clear access, and the upper end where detail, finish or awkward conditions add hours.
What permissions should you check for fascia signage in Montrose?
Shutters aren't named in Class 9A, so in Scotland they usually fall to the appearance test. The same goes for fascia signage at premises in the Montrose area: building work that materially affects the external appearance needs planning permission, and a true like-for-like usually doesn't. Ask the council to confirm the position for your site.
Class VI is the class for lit signs in Scotland, and it is tightly drawn: each character lit from within, the sign at least 2.5m up, no more than 0.25m of projection, and static lighting. One Scottish council says illuminated signs always need express consent, which doesn't match Class VI, so ask the council for the Montrose area before ordering.
At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Angus Council.
| Town | Montrose |
|---|---|
| Area | Angus and Dundee |
| Postcode districts | DD10 |
| Planning authority | Angus Council |
| Building approval | Building warrant (Technical Handbook) |
| Distance from Great Barr | About 289 miles |
| Survey | Free for new work |
Questions about fascia signage in Montrose
What artwork do you need for a sign in Montrose?
Vector files such as AI, EPS or PDF are ideal, along with any brand guidelines. If you only have a low-resolution logo, it can be redrawn, and that time is shown on the quotation.
What if the fascia behind my old sign in Montrose is rotten?
We show you photographs and price the repair before going further. A short section of timber can often be spliced in, while a badly decayed fascia is better replaced with a new subframe.
Will a new sign suit the rest of my Montrose frontage?
That is what the scale drawing is for. We draw the sign on your actual elevation with door, windows and stallriser in place, so you can judge colour and proportion together.
Which way must a fire exit door open on a shop in the Montrose area?
In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.
Do I need a building warrant for a shopfront in the Montrose area?
Usually yes in Scotland, if the work alters a wall or structure. Schedule 3 of the Building (Scotland) Regulations 2004 lists some work that needs no warrant, such as replacing a door or window with its frame, but the standards still apply. Shopfronts aren't named there, so ask the council before relying on it.