Few businesses can shut for a week, so any time on site for fascia signage in the Scottish Islands is planned around the hours you trade. Closed-day or out-of-hours installation can be arranged.
Most frontages share something with someone, be that a door to the flats above, a meter cupboard or a pilaster on the boundary. We pick those up early on fascia signage in the Scottish Islands, because they are far easier to design around than to discover on the day.

What should you look for from fascia signage in the Scottish Islands?
Stripping the old sign usually tells us more than the survey. On premises around Kirkwall we allow for repairs to the subframe, since a fascia that looks sound from the ground can be soft behind the panel.
Salt, traffic film and sun each age a sign differently. Where a fascia in the Scottish Islands takes the full weather, we choose finishes and edge details for that exposure and keep vinyl off the surfaces that bake in the afternoon.
What consents apply to fascia signage in the Scottish Islands?
Section 26 of the Town and Country Planning (Scotland) Act 1997 sets the test: work that doesn't materially affect the external appearance isn't development. For fascia signage at premises in the Scottish Islands area, anything that does needs planning permission, and a true like-for-like replacement usually doesn't. The council confirms how that applies to each site.
Class VI is the class for lit signs in Scotland, and it is tightly drawn: each character lit from within, the sign at least 2.5m up, no more than 0.25m of projection, and static lighting. One Scottish council says illuminated signs always need express consent, which doesn't match Class VI, so ask the council for the Scottish Islands area before ordering.
How much does fascia signage cost in the Scottish Islands?
We would budget £395 to £1,995 plus VAT per sign. Scope sets most of the figure, so a clear brief at the start does more for the budget than any later change of detail.
| Area | Scottish Islands |
|---|---|
| Nation | Scotland |
| Towns covered | 3 |
| Main town | Kirkwall |
| Planning regime | Scotland: 1997 Planning Act and the 1984 Advertisement Regulations |
| Building approval | Building warrant (Technical Handbook) |
| Survey | By arrangement |
Questions about fascia signage in the Scottish Islands
How are letters sized for a fascia in the Scottish Islands?
We start with the fascia depth, then check the reading distance from where people approach. Letters usually fill around 60% of the depth, with spacing adjusted by eye on the drawing.
Can you replace a fascia sign in the Scottish Islands without touching the shopfront?
Yes. Most signs can be changed on their own, and we check the subframe once the old panel is off. If the shopfront will be replaced within a few years, we would tell you, so the sign can be sized for it.
Can a sign go up out of hours on premises around Kirkwall?
Yes, closed-day or out-of-hours installation can be arranged. Most fascia signs take about a day, so the shop rarely needs to close for long.
Does a shop sign in the Scottish Islands area need advertisement consent?
Not always. Scotland's 1984 Regulations let an unlit sign within Class IV(1) go up without an application, and Class VI does the same for a lit sign with each character lit from within. Class VI isn't available in conservation areas, and one council says lit signs always need express consent, so ask first.
Which way must a fire exit door open on a shop in the Scottish Islands area?
In the direction of escape. Regulation 13(2) of the Fire Safety (Scotland) Regulations 2006 also rules out sliding and revolving doors on a dedicated fire exit and says fire exit doors can't be locked against immediate use. Duties sit with dutyholders under Part 3 of the Fire (Scotland) Act 2005, meaning the employer and any person with control of the premises.