0800 088 6248 Get a guide price
  1. Home
  2. Services
  3. Heritage shopfronts
  4. Ashford

Heritage shopfronts in Ashford

Sightlines, proportion and finish worked out for your Ashford building.

Good period work in Kent is mostly restraint. For Ashford premises, that means keeping sound timber, matching mouldings exactly and leaving no sign that a modern hand passed by.

Measuring the opening is the easy part of a survey in Ashford. We also look at the beam above, the pavement fall and any meters or drains nearby.

Restored period shopfront with a painted timber fascia, console brackets and a tiled entrance lobby

What goes into getting heritage shopfronts right in Ashford?

A narrow period front relies on fine detail. For a slim Ashford unit we'd keep the bars thin and the mouldings small, because anything oversized on a small front looks like a later addition.

Period corner shops often had a canted entrance or a curved pane. If yours did, the floor and ceiling at your Ashford premises may still show its line, and we'd look for those marks before redesigning the corner.

Where the building has good brick or stone around the opening, set the frame back in the reveal so the masonry can be seen. On Ashford premises with a flat elevation, that deep reveal throws a shadow line that adds real depth in low sun.

How much could heritage shopfronts in Ashford cost you?

Until the survey is done, plan on £8,495 to £24,995 plus VAT for a typical frontage. Unusual sizes, fine detail and phased working push the figure up, while a simple brief and clear access keep it toward the lower end.

Which applications might heritage shopfronts in Ashford involve?

A true like-for-like replacement usually needs no planning permission in England, because the external appearance isn't materially affected. New materials, a different glass line or altered proportions usually do count as material, so for heritage shopfronts at premises in the Ashford area, an application is then likely. The council confirms which side of that line a job falls on.

At survey we check how things stand for your building, although applications for planning permission or advertisement consent here normally go to Ashford Borough Council.

Ashford at a glance
TownAshford
AreaKent
Postcode districtsTN23, TN24
Planning authorityAshford Borough Council
Building approvalBuilding Regulations (Approved Documents)
Distance from Great BarrAbout 153 miles
SurveyFree for new work

Questions about heritage shopfronts in Ashford

Which old features would you always try to save in Kent?

Tiled stallrisers, mosaic thresholds, console brackets, ironwork and leaded top lights, wherever they survive. These are the details that are hardest to recreate convincingly.

Can a new sign go on my old Ashford shopfront?

Yes, and traditional sign writing often looks right on a painted fascia. We'd draw the lettering to suit the fascia, then fix anything raised so it does no harm to the original timber.

Who makes the joinery for Ashford premises?

Specialist joiners vetted by us and working under S&K Glazing make and fit it. You deal with one named contact, and the contract is with S&K Glazing Limited.

Does the Equality Act apply to a shop entrance in the Ashford area?

Yes. The Equality Act 2010 applies in England, as across Great Britain, and it requires reasonable steps to remove, alter or avoid physical features that disadvantage disabled people. The duty is anticipatory, so it looks at disabled people generally, and a new Services Code replaced the 2011 Code on 5 August 2026.

Does a shop sign in the Ashford area need advertisement consent?

Not always. In England, an unlit sign within Class 5 of the 2007 Advertisement Regulations generally needs no application, and neither does a lit sign within Class 4B. Anything outside those classes needs consent, and Class 4B isn't available in conservation areas, so check before ordering.

Planning heritage shopfronts in Ashford?

Send the address and a photo, and we'll come and measure it.

Call usGet a guide price